Renewable Technologies

WIND

FIXED WIND TRL

1 2 3 4 5 6 7 8 9

FLOATING WIND TRL

1 2 3 4 5 6 7 8 9

Infrastructure

Wind energy involves capturing the power of the wind to generate electricity through a series of turbine and electrical components. As the wind turns the turbine blades, a rotor spins a generator to produce electricity. Wind energy has steadily emerged as a highly efficient and reliable source of sustainable power, with rapid expansion both in Australia and globally. Wind energy systems can either be located onshore, or offshore on fixed or floating platforms depending on water depth. Offshore wind energy presents several opportunities in particular for aquaculture, as the space around offshore wind farms can be used for various aquaculture activities, such as growing shellfish and seaweed. This integration of offshore wind farms and aquaculture can also lead to more efficient use of marine space and potential economic benefits for both industries. Smaller scale micro-wind turbines can also be used to help meet the energy needs of smaller-scale offshore aquaculture operations such as monitoring applications.

Australia’s onshore wind energy sector currently has 13.5 GW of installed capacity. In 2022, wind energy was one of Australia’s primary sources of renewable power, generating enough electricity to meet 11% of the nation’s total demand. Wind generation also grew by 11% in 2022 and has increased by an average of 14% annually since 2015. Currently, there are no offshore wind farms in Australian waters. However, recent support through Commonwealth and State Government legislation has fostered interest in both fixed and floating offshore wind technologies. Fixed offshore wind turbines, which are anchored to the seabed, are well-suited to shallow waters and are already established in various parts of the world. In contrast, floating wind turbines, which are moored to floating platforms, are designed for deeper waters where fixed structures are not feasible, and are currently deployed globally at limited demonstration-scales.

Capital Cost

Estimates of the capital costs of onshore wind, and fixed and floating offshore wind are shown in Figure 8. These reductions in cost are expected to be driven by increasing economies of scale, more competitive supply chains, and further technological improvements.

Figure 8: Capital costs of onshore and offshore fixed and floating wind installations under current policy scenario [CISRO, 2023].

Performance / Resource Assessment

Wind turbine performance is primarily influenced by average wind speed and turbine design. Current design trends show an increase in turbine tower height to harness more energy as wind speeds typically rise with height above ground, as well as increases in turbine rotor diameters to capturing more of the wind. Figure 9 shows the average wind speed over Australia, with coastal areas experiencing consistent and reliable winds, making them ideal for wind farms. Inland regions, including parts of South and Western Australia and Western Australia also offer significant wind energy potential.

Figure 9: Australian wind resource showing average wind speed at hub height of 100 m [Vortex FDC, n.d.]

CASE STUDY

Golden Plains Onshore Wind Farm

The Australian onshore wind industry is well-established. The largest wind farm under construction is at Golden Plains in Victoria. This project, expected to cost over $3 billion AUD, will include up to 215 turbines, each with a capacity of 6 MW, totalling 1,330 MW, as well as a 300 megawatt-hour battery storage system. The site spans 16,723 hectares and is projected to reduce CO2 emissions by more than 4.5 million tonnes annually.

Offshore

No current offshore wind turbines are installed in Australia, however a pilot demonstration project by Saitec, the University of Tasmania, and BMT is focused on assessing the potential to deploy a 2 MW floating offshore wind turbine shown in Figure 10 in Australian waters, setting the stage for future large-scale projects. Additionally, numerous project developers have feasibility licenses approved for the declared offshore wind regions in NSW and Victorian waters using fixed and floating wind turbine technologies.

Figure 10: DemoSath 2 MW floating wind turbine demonstration plant in Spain [Saitec Offshore, n.d.]